What pieces make up the Trex RainEscape Deck Drainage System?
Maximize your living space with the Trex RainEscape Deck Drainage System. Trex RainEscape is a unique under-deck drainage system that uses a combination of troughs and gutters to keep rail, spills, and snow melt from dripping through elevated deck boards. The Trex RainEscape Deck Drainage System creates a dry space that is perfect for lighting, ceiling fans, lounging systems, and more!
It is installed on the deck joists underneath the deck boards, so is typically installed during the deck build. The system can be installed using caulk, tape, and staples. It is designed to be easily installed by any DIY-er or builder. Trex RainEscape protects against rot by keeping floor joists dry and can be adjusted to fit both standard and non-standard joist spacing.
Shop Trex RainEscapeThe Basics
Step 1 - RainEscape Down Spout by Trex
RainEscape Down Spouts for waterproofing under deck space are easy to install and fit both 12-inch and 16-inch center joist cavities. You will need at least one downspout for each joist cavity.
Shop RainEscape Down Spouts
Step 2 - RainEscape Trough By Trex
The Trex RainEscape Trough directs water to your downspouts. Troughs are available in two lengths (12 feet and 16 feet) and can fit 12-inch or 16-inch joist spacing. Attach with caulk and staples and you'll ensure a waterproof seal under your deck.
Shop RainEscape Troughs
Step 3 - RainEscape Butyl Tape By Trex
Available in 4” wide rolls of 50’, the RainEscape Butyl Tape by Trex is specially designed to seal out moisture when used with the Troughs and Down Spouts.
Shop RainEscape Butyl Tape
The Extras
RainEscape Butyl Caulk By Trex
The RainEscape Butyl Caulk By Trex is specially designed for use with the rest of the Trex RainEscape system. Each 10.3 oz tube covers approximately 50 lineal feet.
Shop RainEscape Butyl Caulk
RainEscape Post Flash By Trex
Trex released their RainEscape Post Flash for 4x4 wood posts for further protection against moisture. The snug-fitting collar slides over a 4x4 post and is secured with caulk and butyl tape.
Shop RainEscape Post Flash
RainEscape Elevations Double Sided Tape By Trex
Used on Trex RainEscape installations on a Trex Elevations steel framing system, the RainEscape Elevations Double Sided Tape replaces the need for staples for the Troughs and Down Spouts. Each roll is 2-½” wide by 50’ long.
Shop RainEscape Elevations Double Sided Tape
RainEscape Wall Flashing by Trex
Sealing the gap between your house and deck boards, RainEscape Wall Flashing by Trex is a self-adhesive flash that helps prevent structural damage to your deck. Keep your ledger board dry and safe from snow, rainwater, and rot by using Wall Flash.
Shop RainEscape Wall Flashing
More Information
Materials Estimator
Trex RainEscape has created a Materials Estimator that can help you determine the quantities of each item that you will need for the size of your deck. You just need to measure your deck's dimensions and fill out the form to see what you need!
Match RainEscape To Your Trex Decking
Trex RainEscape comes in two color options: black and tan.
Use the charts below to match your RainEscape system to your specific shade of Trex decking for a cohesive deck look!
